Can we just sand our stain off the door jams and paint over?

best stain removercleaning suppliesjanitorial suppliesremoving stains


We have a 30 year old home and the baseboards and door jams are stained a dark brown. We are replacing the floor and will replace the old baseboards, but I was wondering what we could do to use the old door jams. The varnish is very thin and worn away in some places. Can we sand off the varnish, prime and paint over it? If so, how far down do we sand? I know it will be a lot of work, but I think it will be less expensive. What do you think? HELP!

Facebook comments:

Comments

  1. cpitre74 says:

    if the trim is not real beat up just use a scotch brite pad to rough up the surface of the trim ( go with the grain of the wood) that is if you are going to prime and paint (also with the grain of the wood)

  2. trevor K says:

    If your going to paint over the old stain, you will just have to prime and paint,
    but if your staining on top of the old stain then you will have to stain, then do NOT prime, try a clear sealer if you really want to, but then just stain over the sanded wood
    You wont have to sand very much, just get the wood coarse so the stain has something to soak into

  3. reinders1 says:

    Yes you can. It should not take much removal. Just get the glaze of the varnish off, wipe it down with TSP/water mix, let it dry, primer and paint!

  4. raffimelinda@sbcglobal.net says:

    You can def paint over old wood. First lightly sand the wood to "rough up" the surface so that the new primer and paint will stick to the wood. You don’t have to completely remove the varnish, just sand it enough to remove the shine. Next, prime using an oil based primer specifically for wood. If you are brushing, make sure the primer is NOT a fast dry product. Look for a primer that takes a full day to dry. After the primer is dry, you can lightly sand to smooth out any heavy areas, or areas where the grain has lifted. This will ensure a smooth topcoat finish. Last, use an acrylic or oil enamel designed for woodwork. Both have their advantages – Oil base takes longer to dry, but leaves a very durable, smooth finish. However, if you are using a white or light color, they tend to yellow over time. An acrylic product will dry fast, and will not yellow, but may leave a few more brush marks.

    Hope that helps – good luck!

  5. LadyTazzy says:

    Just sand the surface so its not real smooth, prime it and paint it. That’s all.

  6. Allison1888 says:

    Agree with others. If you’re staining over it first, just sand it so you raise the grain.

Leave a Reply